User Tools

Site Tools


my_4k_pin

This is an old revision of the document!


My 4K Virtual Pin

You'll get lots of advice about what the hardware requirements to run 4k, vpx, 3 screens etc.

I'm not promoting anything, but i do like FACTS and actual results from real-world testing.

So here's my medium powered PC which Im happy with currently. (May 2019). If i was to build today I'd probably go a little higher as GPU prices have dropped and a bit faster to keep up in future…but for now I'm not upgrading.

Best. run this free speed-test to compare to mine if you'd like: https://cpu.userbenchmark.com/Software

Here's my PC:

Intel Core i5-8400 Coffee Lake 6-Core 2.8 GHz (4.0 GHz Turbo) LGA 1151
GIGABYTE Z370 HD3 (rev. 1.0) LGA 1151
8GB Ram 3200mhz
RX 480 (4gb version)… yes oldie but what i had at the time :)
500gb SSD drive

my cab

3-Screens TOTAL:
Playfield TV (TCL) 4K / 60hz
BackGlass HD 1920×1080 TV 60hz
DMD-Topper/DMD LCD 1600×900 PC Monitor.
DOF
MX Leds
SSF

My results from testing above:

My VPX settings for testing

My 'proof'. Here's the latest g5k TAF table which is seen as a very 'high-end' resource table, also the 2nd part of video is the POTC pup-pack running with POTC which is a 'high-end' puppack as well. Using freezy LCD DMD (non-color roms).

video (f11 stats in vpx here) http://nailbuster.com/uploads/VPX4Ktest.mp4

I'm happy with 4K performance on my cab. Im sure if I spent a lot more on CPU/GPU it would possibly do more. But remember, with the TV locked at 60fps (vsync) thats the benchmark to not go under. But I don't know how much benefit there is to go over that….that said, you should NOT cheap-out on the PC in your cab. With all the time/effort/costs for other parts, you want to have a really good experience as well… and one last thing… no matter what… go 4K… 1080p to 4K is a HUGE difference.

again… feel free to disagree, but I thought I'd put it out there what Im using and working with….happy gaming!

my_4k_pin.1559246099.txt.gz · Last modified: 2019/05/30 15:54 by pinupadmin