User Tools

Site Tools


hardware

This is an old revision of the document!


Hardware Config & Setup


DOF Configuration

In PUPMenuScript.pup file there is a section uptop about DOF.

You want to set

=====================DOF CONFIG =====================
var useDOF = true;

make sure its all lowercase!

YOU MUST UPDATE YOU CONFIGURATION FILES FROM DOF CONFIGTOOL ONLINE TO ENSURE YOU HAVE THE DOF TEMPLATE FOR POPPER!


REAL-DMD Hardware

All you need to do is to modify the pupscript file to set

var useDMD = true;

make sure its all lowercase!

Once that is setup, when you run you should get a default png displaying on your dmd. if that works, then you’re all set, and can use media manager for your dmd like any other display.

Note: supported formats are png files and animated GIFs (10 fps) So if you have avi/mp4s you’ll need to convert then to animated GIFs. I made a simple batch file that may help, or you can use another tool if you’d like.


hardware.1524669426.txt.gz · Last modified: 2018/04/25 11:17 by pinupadmin