User Tools

Site Tools


pup_terms

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
pup_terms [2020/07/17 12:51]
pinupadmin
pup_terms [2020/07/21 00:42] (current)
pinupadmin
Line 4: Line 4:
  
 Lets get to it: Lets get to it:
- 
-The Most current and modern screen layout (which Id recommend): 
  
 ===== 3-Screen with FULLDMD (16:9 lcd screen) ===== ===== 3-Screen with FULLDMD (16:9 lcd screen) =====
 +
 +the Most current and modern screen layout (which Id recommend):
  
 {{:3_screen_fulldmd.png?nolink&800x617}} {{:3_screen_fulldmd.png?nolink&800x617}}
  
 ===== 3-Screen with Split DMD/Topper ===== ===== 3-Screen with Split DMD/Topper =====
 +
 +Having a physical bezel to simulate two screen from 1 screen. I would suggest not to go this route any longer as current/new/modern tables are using the Full HD 16:9 area so best to keep it open like above.
  
 {{:3_screen_split.png?nolink&640x1138}} {{:3_screen_split.png?nolink&640x1138}}
  
 ===== 2-Screen with DMD (4:1 RealDMD or 4:1 LCDDMD) ===== ===== 2-Screen with DMD (4:1 RealDMD or 4:1 LCDDMD) =====
 +
 +If you prefer a more 'traditional' or 'pure' pinball look. You can still use PuP-Packs and even put the modern PuP-FULL-DMD 'embedded' into the backglass montior with a frame around.
 +
 +IMO Real-DMD are 'brighter' and more authentic, BUT require a more complex software config to get working with all emulators. If you feel you are not a 'power' PC/software type of person then going with a LCD-DMD 4:1 will be easier and you will get benefit of more pixels.
  
 {{:2_screen_dmd.png?nolink&640x917}} {{:2_screen_dmd.png?nolink&640x917}}
Line 31: Line 37:
 {{:fss.png?nolink&640x1024}} {{:fss.png?nolink&640x1024}}
  
-===== Separate TOPPER Displays =====+===== Separate TOPPER Displays (optional) =====
  
 This is personal choice and can come in different shapes and sizes and usually will be placed above the BG like this: This is personal choice and can come in different shapes and sizes and usually will be placed above the BG like this:
Line 37: Line 43:
 {{https://vpinball.com/wp-content/uploads/cmdm/51185/TopperSample-600x600.jpg?nolink&|Virtual Topper Images – VPINBALL.COM}} {{https://vpinball.com/wp-content/uploads/cmdm/51185/TopperSample-600x600.jpg?nolink&|Virtual Topper Images – VPINBALL.COM}}
  
-===== PuP-Displays.   Physical monitors don't matter. =====+===== Apron Displays, one or many (optional) ===== 
 + 
 +{{:034d221c1d199498441a907001dc7ea2.png}} 
 + 
 +===== PuP-Displays. Physical monitors don't matter. =====
  
-All PinUP Displays are just virtual windows.  Which means they exist anywhere you tell windows to show them and nothing is enforced.  If you want to move a PuP-Packs Backglass display to your Topper that is easy.  You can have a custom PuPLayout for a 4:3 display.  You can have a FullDMD PuPDisplay be on your BackGlass with a frame around.  Don't think you are limited by your hardware with PuP-Packs,  you can get very creative (once you fuly understand how to use puppackeditor).+All PinUP Displays are just virtual windows. Which means they exist anywhere you tell windows to show them and nothing is enforced. If you want to move a PuP-Packs Backglass display to your Topper that is easy. You can have a custom PuPLayout for a 4:3 display. You can have a FullDMD PuPDisplay be on your BackGlass with a frame around. Don't think you are limited by your hardware with PuP-Packs, you can get very creative (once you fuly understand how to use puppackeditor).
  
-For example,  lets say there's a PuPPack that does everything on the BackGlass.  BUT you only have a 2-screen system with noDMD.  You could make a custom PuP-Pack layout for that table that makes the BackGlass pupdisplay be the top portion of your backglass (keep 16:9 pupwindow dimensions) and you then use the bottom portion of your 'physical backglass montior' for your freezy/dmdext DMD display.  You could even get more creative and add a pupdisplay as a overlay alpha display to add speakers and a frame around the BG and DMD on your physical monitor.+For example, lets say there's a PuPPack that does everything on the BackGlass. BUT you only have a 2-screen system with noDMD. You could make a custom PuP-Pack layout for that table that makes the BackGlass pupdisplay be the top portion of your backglass (keep 16:9 pupwindow dimensions) and you then use the bottom portion of your 'physical backglass montior' for your freezy/dmdext DMD display. You could even get more creative and add a pupdisplay as a overlay alpha display to add speakers and a frame around the BG and DMD on your physical monitor.
  
-You can see this video on how to move a backglass puppack to topper for example: https://youtu.be/9FSBGFGWGgY+You can see this video on how to move a backglass puppack to topper for example: [[https://youtu.be/9FSBGFGWGgY|https://youtu.be/9FSBGFGWGgY]]
  
 custom PuP-Layouts by table read here: [[:pinup_pack_layout|http://www.nailbuster.com/wikipinup/doku.php?id=pinup_pack_layout|]] custom PuP-Layouts by table read here: [[:pinup_pack_layout|http://www.nailbuster.com/wikipinup/doku.php?id=pinup_pack_layout|]]
  
  
pup_terms.1595004668.txt.gz · Last modified: 2020/07/17 12:51 by pinupadmin