User Tools

Site Tools


pinup_poppervr_customize

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
pinup_poppervr_customize [2021/09/09 10:25]
pinupadmin created
pinup_poppervr_customize [2021/09/09 11:08] (current)
pinupadmin
Line 5: Line 5:
 The best resource is following the great tutorials made by Scampa on youtube here: The best resource is following the great tutorials made by Scampa on youtube here:
  
-https://www.youtube.com/channel/UC5YBLutl7WAlHrMp5pimJtA/videos+[[https://youtube.com/playlist?list=PL3PApg7GH5m1AhJjGRfh5Htgogh-vkaFJ|https://youtube.com/playlist?list=PL3PApg7GH5m1AhJjGRfh5Htgogh-vkaFJ]]
  
 ===== Working with POPPERVR ===== ===== Working with POPPERVR =====
Line 17: Line 17:
  
 when in PopperVR Room you can use your handcontrolers to move around and/or teleport. Pressing the Secondary button on right-controller will bringup/toggle the PopperVR Menu. Pressing the right-trigger will select things in the VR ROOM/Menu. You can teleport by using the right-controller/grip-finger button. when in PopperVR Room you can use your handcontrolers to move around and/or teleport. Pressing the Secondary button on right-controller will bringup/toggle the PopperVR Menu. Pressing the right-trigger will select things in the VR ROOM/Menu. You can teleport by using the right-controller/grip-finger button.
 +
 +===== PopperVRSettings.json =====
 +
 +here's TWO things PopperVR does. One is MIRROR an entire windows monitor/display to a 3d panel, the other is grab/play pupdisplays (mp4s/pngs) from Popper WebRemote.
 +
 +Simple mode is just to mirror your Windows Desktops into the PopperVR Room.\\
 +Once that is working, you can jump to next-level where you setup Popper WEBRemote/Server and use media from your Popper DB in realtime.
 +
 +\\
 +So, simple step one is run via the OPerator Menu in Popper. Startup Popper and go to Operator menu and toggle/StartVR custom script.\\
 +if you have screen issues you will need to modify PopperVRSettings.json in PopperVR folder with texteditor if needed. by default, positions are grabbed with Popper running.
 +
 +Keep displays either 0=off, 2=mirror monitor. The important items to change are:
 +
 +the windows monitorNumber# (starts at 0, this is random with windows so you may have to change the #'s trial and error) Note -1 means to grab the monitor the POPPERX display is on.\\
 +invertX,Y if needed. Once you see the screens in VR you will see if these are needed. 1/0 are values.
 +
 +don't use any PUPDISPLAYS active=1 for now keep active=2 for mirroring displays… pupdisplays can be advanced setup later.
  
 **fine-tune your HOME position infront of cab.** **fine-tune your HOME position infront of cab.**
pinup_poppervr_customize.1631197501.txt.gz · Last modified: 2021/09/09 10:25 by pinupadmin