PinUP Virtual Pinball System

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== PinUP Player/PuP-DMD Drivers Only ======

It is recommended to install PinUP via Baller Installer as that ensures a smooth install of all Virtual Pinball software and components. Even if you wish to use a different Front-End software, you should still use Baller to get all parts of the VPIN setup cleanly. For a full Baller Installer setup with Front-End and all VPIN software [[:baller_installer|see here:]]

If you still wish to install just the PinUP Player Component manually then follow this page. Note: this does not install VPX or FP or anything other than allowing your manual setup to use PinUP Packs and PuP-DMDs.

**Download **the PinUP Player Zip here:

//REMEMBER TO UNBLOCK THE ZIP AFTER DOWNLOAD.//

[[https://www.nailbuster.com/updatesv15/PinUPPlayer_v150_2025.zip|https://www.nailbuster.com/updatesv15/PinUPPlayer_v150_2025.zip]]

----

There is a ReadME.TXT in the root of zip that you should read and follow. Here's a YouTube Video I made to following along:

[[https://youtu.be/Tn1fI8I6Wuk|https://youtu.be/Tn1fI8I6Wuk]]

{{ youtube>Tn1fI8I6Wuk}}

----

If you run into problems afterwards then see this wiki page:

[[https://www.nailbuster.com/wikipinup/doku.php?id=puppack_troubleshoot|https://www.nailbuster.com/wikipinup/doku.php?id=puppack_troubleshoot]]