User Tools

Site Tools


emulator_fx_non_steam

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
emulator_fx_non_steam [2019/07/01 12:25]
pinupadmin
emulator_fx_non_steam [2019/10/28 18:15]
A User Not Logged in
Line 6: Line 6:
  
 {{:​0abb942ba45c320c5b08c60a64c2afdc.png}} {{:​0abb942ba45c320c5b08c60a64c2afdc.png}}
 +
 +===== NEW!! Exciting update to PuPDMD inside Popper to mirror FX3/2 easily. =====
 +
 +see here: [[:​pupdmd_fx3|http://​www.nailbuster.com/​wikipinup/​doku.php?​id=pupdmd_fx3|]]
 +
 +PupDMD is an alternative to using DMDExt. ​ So if you do not want to use PuPDMD then follow the DMDExt instructions below;
 +
 +**For DMDExt:**
  
 DMDExt is difficult to get setup and should be done OUTSIDE of Frontend at first to make sure you have all the proper DMDEXT parameters set. Once that works then you can copy your tested parameters into the launch script of FX3. DMDExt is difficult to get setup and should be done OUTSIDE of Frontend at first to make sure you have all the proper DMDEXT parameters set. Once that works then you can copy your tested parameters into the launch script of FX3.
Line 17: Line 25:
 //note: dmdext.exe is an exe that will mirror the FX3 dmd to a better looking LCD-DMD window or your hardware DMD. It is DIFFERANT THAN dmddevice.ini and it only gets its settings via command line parameters… no changes to the dmddevice.ini will help/affect the DMDExt.exe program.// //note: dmdext.exe is an exe that will mirror the FX3 dmd to a better looking LCD-DMD window or your hardware DMD. It is DIFFERANT THAN dmddevice.ini and it only gets its settings via command line parameters… no changes to the dmddevice.ini will help/affect the DMDExt.exe program.//
  
-Here is a sample of a LCD-DMDext Setup that I use: You would change the #'s in the virtual-position parameters to your screen size position. THIS WILL NOT WORK WITH HARDWARE DMDs. +Here is a sample of a LCD-DMDext Setup that I use: You would change the #'s in the virtual-position parameters to your screen size position. THIS WILL NOT WORK WITH HARDWARE DMDs.<​file>​
- +
-<​file>​+
 cd "​C:​\Visual Pinball\VPinMAME"​ cd "​C:​\Visual Pinball\VPinMAME"​
  
Line 75: Line 81:
 see here: [[https://​vpinball.com/​VPBdownloads/​fx3-ssf-surround-sound-feedback-pup-packs/​|https://​vpinball.com/​VPBdownloads/​fx3-ssf-surround-sound-feedback-pup-packs/​]] see here: [[https://​vpinball.com/​VPBdownloads/​fx3-ssf-surround-sound-feedback-pup-packs/​|https://​vpinball.com/​VPBdownloads/​fx3-ssf-surround-sound-feedback-pup-packs/​]]
  
-For FX2 Sample Launch Script +For FX2 Sample Launch Script<​code>​
- +
-<​code>​+
 @echo off @echo off
  
emulator_fx_non_steam.txt · Last modified: 2019/10/28 18:15 by A User Not Logged in