User Tools

Site Tools


emulator_future_pinball

Future Pinball Emulator Config

The default Popper install should work fine for most setups by default. You may need to make changes to your launch script depending on how you have Future Pinball installed, and what you use with it.

For the latest info on setting up “Future Pinball” properly, goto TerryRed's Guide that covers almost everything, including the new PinEvent standard the allows all Pinup Player features to work with Future Pinball now.

https://vpinball.com/forums/topic/future-pinball-and-bam-mega-guide-by-terryred/

Here's a showcase video for PinEvent that demonstrates PuP and PUPDMD on FP.

https://youtu.be/j9k37VCbQXI


Typical Emulator Setup For Future Pinball

Launch Script

rem FUTURE DMD. Remove "rem" on next 2 lines if you are using FutureDMD. Change the directory to where you have FutureDMD installed.

Rem CD /d "C:\games\Future Pinball"
Rem START "" "FutureDMD.exe" table="[GAMENAME]" close=1

START "" "[STARTDIR]Launch\VPXSTARTER.exe" 5 5 20 "Future Pinball"

rem This will load Future Pinball and your selected table using BAM (Better Arcade Mode).

START "" "[DIREMU]\FPLoader.exe" /open "[GAMEFULLNAME]" /play /exit /arcaderender /STAYINRAM

Exit Script

"[STARTDIR]LAUNCH\PUPCLOSER.EXE" WINTIT "Future Pinball" 2 1

rem          Remove "rem" on the next line to close Future DMD after exiting a table.
rem  taskkill /f /im "FutureDMD.exe"

For PuPDMD with FUTUREDMD For Future Pinball DMD

For Pinup Player Popper Version - 1.4.4 or Higher

This is a new method using FUTUREDMD DMD with a REAL or virtual DMD using Poppers PuPDMD driver. Note: you need Popper installed to use this. (will not work with just pinup player)

In Future Pinball Folder :
FUTUREDMD.ini Set your width/height to 128×32 and place in lcd area where freezy lcd would show.
Future Dmd – https://www.vpforums.org/index.php?app=downloads&showfile=8222
Read the PDF file that comes with FutureDMD

FP Launch script keep as is and add this at end: (change folder location of vpinmame if needed)

timeout /t 20
cd "C:\Visual Pinball\VPinMAME"
start /min "" "PUPDMDControl.exe" FP
emulator_future_pinball.txt · Last modified: 2020/08/20 13:23 by outhere